Skip to content


HDMI-Xactor is a comprehensive VIP solution for HDMI 2.0 source and sink designs. HDMI-Xactor implements a complete set of models, protocol checkers, and compliance testsuites in 100% native SystemVerilog and UVM.


  • Compliance testsuite
  • User Guide


  • HDMI-Xactor supports the standards from and VESA
  • HDMI revision 2.0b, CEA-861-F, E_EDID_Standard, DSC 1.2, EDDC revision 1.0
  • CTS 2.0b/1.4b testsuite
  • Verification of both transmitter/source and receiver/sink and PHY designs
  • Automated dynamic Video and Audio traffic generation and PHY bit rate clock generation delivering fully accurate frame synchronization timing of multiple video and audio sources based on various shaping parameters including random receiver/sink device peripheral parameter set, interleaved/multiple packet control, interleaved frames control, line and frame blanking intervals
  • Standard DSC extensions
  • Comprehensive protocol checking and coverage reports
  • Protocol analyzer tracker report at all layers
  • Error injection and scoreboarding supported through Automated Frame Generation common callback for layer-specific
  • Inspection and error injection using methods to in-line
  • Modify, drop, inject packet ahead/behind, force next state
  • Standards-based and custom Avery Conformance testsuites
  • Data Island transmissions with different packet types
  • Enhanced DDCe
  • E-EDID and E-EDID extension block
  • Dynamic Vparameter selection
  • 3D video extensions
  • 3D, multi-stream, and infoframe audio generation
  • Status and control data channel
  • Dynamic audio lipsync
  • CEC discovery, polling messages, power state, and vendor message
Protocol Family Standard Organization Sub Protocol Models
HDMI CTS 2.1b Source/Sink
HDMI CTS 2.1c Repeater